Evidence of ion diffusion at room temperature in microcrystals of the Bi2Sr2CaCu2O8+delta superconductor

We have studied Bi-2212 microcrystals aged at ambient conditions for 40 days. Combined x-ray absorption near edge structure and x-ray fluorescence measurements with micrometer space resolution show both an increase of Cu$^{+}$ with respect to Cu$^{2+}$ and an enrichment in Cu vs Bi and Sr cation content near the sample edges in the b-axis direction. A parallel study on an electrically contacted sample has indirectly detected the O loss, observing both a resistivity increase and an increase in sample thickness near the edges. We conclude that the O out-diffusion along the b-axis is accompanied by Cu cation migration in the same direction.Comment: RevTeX 4, 10 pages, 3 figure

Size-dependent resistivity in a micro-processed YBa2Cu3O7-δ superconducting whisker

We report the results of a detailed geometrical and electrical study which has been performed on a YBa2Cu3O7-δ superconducting whisker. This sample has undergone three subsequent steps of micro-machining by means of a focused ion beam (FIB) instrument, in order to progressively decrease its cross-sectional area from ~77 to ~4 µm2, over a length of about 150 µm. A simple analytical model based on the exact shape both of the electrical contacts and of the micro-machined material has been proposed for the voltage drop; besides, an accurate geometrical characterization of all of the sample details has been performed by means of SEM microscopy. This enabled us to extract accurate electrical resistivity curves from the resistance versus temperature characteristics for each of the fabrication steps of the whisker, showing an increase of the sheet resistivity with decreasing cross-sectional area. Among the possible physical reasons for such behaviour, inelastic electron scattering at the sample surfaces has been ruled out because of the very short mean free path of carriers in YBCO. On the other hand, oxygen out-diffusion and Ga ion implantation due to the FIB processing are most likely to be responsible for the observed resistivity trend

Antimicrobial activity of MgB2 powders produced via reactive liquid infiltration method

We report for the first time on the antimicrobial activity of MgB2 powders produced via the Reactive Liquid Infiltration (RLI) process. Samples with MgB2 wt.% ranging from 2% to 99% were obtained and characterized, observing different levels of grain aggregation and of impurity phases. Their antimicrobial activity was tested against Staphylococcus aureus ATCC BAA 1026, Enterococcus faecalis ATCC 29212, Escherichia coli ATCC 25922, Pseudomonas aeruginosa ATCC 27853, and Candida albicans ATCC 10231. A general correlation is observed between the antibacterial activity and the MgB2 wt.%, but the sample microstructure also appears to be very important. RLI-MgB2 powders show better performances compared to commercial powders against microbial strains in the planktonic form, and their activity against biofilms is also very similar

Progress in Diamond Detector Development

Detectors based on Chemical Vapor Deposition (CVD) diamond have been used successfully in Luminosity and Beam Condition Monitors (BCM) in the highest radiation areas of the LHC. Future experiments at CERN will accumulate an order of magnitude larger fluence. As a result, an enormous effort is underway to identify detector materials that can operate under fluences of 1 · 1016 n cm−2 and 1 · 1017 n cm−2. Diamond is one candidate due to its large displacement energy that enhances its radiation tolerance. Over the last 30 years the RD42 collaboration has constructed diamond detectors in CVD diamond with a planar geometry and with a 3D geometry to extend the material's radiation tolerance. The 3D cells in these detectors have a size of 50 µm×50 µm with columns of 2.6 µm in diameter and 100 µm×150 µm with columns of 4.6 µm in diameter. Here we present the latest beam test results from planar and 3D diamond pixel detectors

Beam test results of 3D pixel detectors constructed with poly-crystalline CVD diamond

As a possible candidate for extremely radiation tolerant tracking devices we present a novel detector design - namely 3D detectors - based on poly-crystalline CVD diamond sensors with a pixel readout. The fabrication of recent 3D detectors as well their results in recent beam tests are presented. We measured the hit efficiency and signal response of two 3D diamond detectors with 50 × 50 μm cell sizes using pixel readout chip technologies currently used at CMS and ATLAS. In all runs, both devices attained efficiencies >98 % in a normal incident test beam of minimum ionising particles. The highest efficiency observed during the beam tests was 99.2 %